Key Features

• It is made of 4 layers to protect health with 95% filtration efficiency
• 1st top layer is nonwoven spunbond fabric
• 2nd layer is melt blown fabric
• 3rd layer is ES hot air filter
• 4th & bottom layer is nonwoven spunbond fabric
• Made with seamless joint to prevent the particulate contaminants
• Thermo plastic elastomer straps for comfortable wear
• Flat nose clip made of aluminium
• Nose foam made of polyurethane
• Cover web made of polyester
• This respirator contains no components made from latex
• Approximate weight of 0.35 Oz

Size & Packaging

BODY SIZE	LENGTH	131 mm
	WIDTH	114.5 mm
	HEIGHT	50 mm
NOSE CLIP	LENGTH	88 mm
HEAD BAND	UPPER LENGTH	300 mm
	LOWER LENGTH	280 mm

• Individually packed 20 pcs into a Box & 8 boxes to case of 160 pcs

Uses

• It is recomended to use for cumulative time of 48 hoursIt is recomended to use for cumulative time of 48 hours
• Change the mask frequently for health , hygiene
• This is disposal product
• Do not use after washing
• Do not use for gases & vapours , oil , aerosols , asbestos , arsenic , cadmium , lead methylene dianiline (MDA) or abrasive blasting
• Do not use for particulate concentrations exceeding 10 X PEL / OEL
• Replace the respirator when it becomes dirty , damaged or difficult to breathe

Shelf Life Storage & Disposal:

• 5 years from date of manufacture
• Use by date on box MM/YYYY
• Store in original packing , away from contaminated areas , dust , sunlight , extreme tempratures , excessive moistures ,Store in original packing , away from contaminated areas , dust , sunlight , extreme tempratures , excessive moistures ,
• Store in temprature between 30 to 40 degrees centigrade
• Shelf life is 5 years from date of manufacture
• Handle disposal with care and in accordance to national regulations

About The Manufacturer

• BEXIMCO is South Asia’s largest vertically integrated Textiles & Apparel Manufacturer.
• With 40,000 employees at a 350-acre green campus, BEXIMCO’s production capacity is 350,000 garments per day.
• BEXIMCO Pharma is Bangladesh’s first US FDA approved pharmaceutical company and exports to more than 50 countries including USA, Canada, Australia and throughout Europe.
• BEXIMCO PPE supplies a range of PPE including medical scrubs, disposable gowns, caps, shoe covers and coveralls, antimicrobial bed sheets, pillow covers and curtains.
• BEXIMCO’s PPE production capacity is up to 500,000 items per day.

DYSIN Test Report for DGDA

Item name:
N95 Mask and KN95 Mask

WHO Recommendation as minimum standard:
- Minimum "N95" respirator according to FDA Class II, under 21 CFR 878.4040, and CDC NIOSH, or equivalent
- Minimum "FFP2 according to EN 149, EU PPE "
- Regulation 2016/425 Category III, or equivalent
- Fluid resistant surgical N95 respirator with minimum 80 mm Hg pressure based on ASTM F1862, ISO 22606, or equivalent

Biosafety Level: FDA Class II, under 21 CFR 878.4040, and CDC NIOSH, or equivalent

Possible Test Parameters:

Serial No.	Test Parameter	Test Standard	Available Facilities	Remarks
1	Particulate Filtration	NIOSH 42 CFR 84.181, or equivalent	No	45 Days
2	Sub-Micron Particulate Filtration Efficiency	F2299, or equivalent	No	45 Days
3	Breathing Resistance,Differential Pressure	EN 14683:2019, NIOSH 42 CFR 84.180, or equivalent	No	45 Days
4	Water Resistance Hydrostatic Test	BS EN 13795:2019; AATC 127, or equivalent	No	30 Days
5	Test Bacterial Filtration Efficiency *	F 2101, or equivalent	No
6	Resistance to Penetration by Synthetic Blood*	F1862 , or equivalent	No	* PPE importers must present relevant documents and certification

Instructions for Producers, Importers and Suppliers:

• All items MUST have product specification sheet;
• All items Must have SOP to use and to dispose;
• All items Must be individually packaged;
• All items Must be latex free (surgical or no-surgical);
• All surgical items Must be supplied Sterile;
• All Sterile items Must be packaged in a Sterile facilities.