Coverall
BEX-PPE-CA-01
- * Breathable, nonwoven spunbond PP+PE laminated fabric
- * Fabric weight – 65 GSM
- * Dust free, anti-static and excellent barrier properties
- * High density and high strength with taped seams
Key Features
- High density and high strength with taped seams
- Taped seams: polyethylene
- Sewing Thread: Polyester
- Velcro: Polyester
- Elastic: Non Latex- synthetic rubber
Standards
BEX-PPE-CA-01 Coverall complies with following standards:
- BS EN 14126 (barrier to infective agents)
- Chemical protective clothing, Category III, Type 3-B, 4-B, and 5-B
- Antistatic treatment (EN 1149-5)
- AAMI-PB702012- Level 1/ Level 2/ Level 3
Size
| Sizes | Height in inches excluding hood from HPS | Height in cms excluding hood from HPS | Chest in inches | Chest in cms |
| S | 66 inches | 168 cm | 57 inches | 145 cm |
| M | 68 inches | 173 cm | 59 inches | 150 cm |
| L | 70 inches | 178 cm | 61 inches | 155 cm |
| XL | 72 inches | 183 cm | 63 inches | 160 cm |
Storage & Disposal
- Keep in a dry & clean place & in original packaging
- Keep away from direct sunlight, source of high temperature & solvent vapors
- Ideal storage temp 30-35 Degree Centigrade
- Shelf life is 5 years
- Replace garments if damaged
- Handle disposal with care and in accordance to national regulations
Use Limitations
- Don’t use for sparks or flames or combustible liquids
- Avoid environments with high mechanical risks for cuts, abrasion & tears
- Avoid environments with excessive heat
Care Instructiuons
- Disposable Coverall
- Do not wash, iron, tumble dry or dry clean
Test Report of PP+PE Laminated fabric used in Coverall/ Protective Suits
DYSIN Test Report for DGDA
Item name:
coverall-1 - Disposable, with elastic wrists
WHO Recommendation as minimum standard:
- Option 1: fluid penetration resistant: EN 13795 high performance.
- Option 2: AAMI PB70 level 2 performance or above, or equivalent.
Biosafety Level:
Level 1, Level 2, or equivalen
Possible Test Parameters:
| Serial No. | Test Parameter | Test Standard | Available Facilities | Remarks |
| 1 | Tensile Strength | ASTM D5034, ASTM D1682 | Yes | |
| 2 | Tear resistance | ASTM D5587(woven), ASTM D5587 (nonwoven), ASTM D1424 | Yes | |
| 3 | Seam Strength | ASTM D751 (stretch woven or knit) | Yes | |
| 4 | Water vapor transmission(breathability) | ASTM F1868 Part B, ASTM D6701 (nonwoven), ASTM D737-75;or equivalent (ASTM E96/E96M-16 | No | 30 Days |
| 5 | Water Resistance: Hydrostatic Test | BS EN 13795:2019; AATC 127 | No | 30 Days |
| 6 | Water Resistance: Impact Penetration Test | AATCC 4 or equivalent (e.g. AATCC 22, AATCC 35) | Yes |
Item name:
coverall-1 - Fluid Resistant, Disposable, with elastic wrists
WHO Recommendation as minimum standard:
- Option 1: fluid penetration resistant: EN 13795 high performance, or AAMI PB70 level 3 performance or above, or equivalent.
- Option 2: blood borne pathogens penetration resistant: AAMI PB70 level 4 performance, or (EN 14126-B) and partial body protection (EN13034 or EN 14605), or equivalent.
Biosafety Level:
Level 3, Level 4, or equivalent
Possible Test Parameters:
| Serial No. | Test Parameter | Test Standard | Available Facilities | Remarks |
| 1 | Tensile Strength | ASTM D5034, ASTM D1682 | Yes | |
| 2 | Tear resistance | ASTM D5587(woven), ASTM D5587 (nonwoven), ASTM D1424 | Yes | |
| 3 | Seam Strength | ASTM D751 (stretch woven or knit) | Yes | |
| 4 | Water vapor transmission(breathability) | ASTM F1868 Part B, ASTM D6701 (nonwoven), ASTM D737-75 Equivalent (ASTM E96/E96M-16) can be applicable for Level 3 PPE6 | No | 30 Days |
| 5 | Water Resistance: Hydrostatic Test | BS EN 13795:2019; AATC 127 | No | 30 Days |
| 6 | Water Resistance: Impact Penetration Test | AATCC 4 or equivalent (e.g. AATCC 22, AATCC 35) | Yes | |
| 7 | Viral Penetration | ASTM F1671 or equivalent* | No | *Applicable for Level 4 PPE; PPE importers mustpresent relevant documents and certification |